Don't have an account yet? You can create one. As a registered user you have some advantages like theme manager, comments configuration and post comments with your name.
Who's Online
There are currently, 9 guest(s) and 0 member(s) that are online.
You are Anonymous user. You can register for free by clicking here
Helicopter Compatibility Chart
Helicopter Model
Leveler
Comments
Purchase Links
ALIGN
T-Rex 250
250 Leveler
3.5mm
This leveler was designed specifically for the T-Rex 250
This leveler will work on the Protos, however it is slightly less than
optimal. This leveler will rest on the ball links themselves and not
the swashplate. Be sure there is no molding inconsistencies in your
swash links when using this tool.
This leveler was designed specifically for the T-Rex 600. Note the
T-Rex 600 main shaft is slightly undersized in comparison to other 10mm
main shaft models. Any extra slop in the leveler translates directly to
reduced accuracy, so our leveler takes the undersized main shaft into
consideration in the design. Because of this the 10mm T-Rex 600 leveler
cannot be used by other models with appropriately sized main shafts.
250 Leveler
450 Leveler
450 Leveler
500 Leveler
MSH
600 Leveler
700 Leveler
Vibe 50 Leveler
Logo Leveler
